| Author | Message | ||
| David Eugene Whitcher (Dralius)
|
I am in the process of updating a game file with additional graphics. Most of them work fine; with one board i am getting the error the following bitmap couldn't be loaded: "grey10x10.bmp" I checked and the file name is correct. what could be causing the problem? | ||
| Matti Wirkkala (Mwirkk)
|
It's hard to say with this amount of info. Is the file in the expected location? Is the file verified free of corruption? Those would be the two most obvious issues, of course. -MLW  | ||
| Jeff Mallett (Jeffm)
|
Yes, those are the two things. If you're not specifying grey10x10.bmp with a path name in the ZRF, try putting it in the same folder as the ZRF and see if it loads. | ||
| Ken Franklin (Kenz)
|
When it's not a missing subfolder location error... I've gotten this 'board image' load error almost routinely (never from games at this site). I usually load and RE-SAVE the board image (via Paint Shop Pr0 vers3.12) - unknown problem solved! | ||
| David Eugene Whitcher (Dralius)
|
it was a hard to see typo in the file tree. thanks all. | ||
| As Bardhi (Aepasa) New member Username: Aepasa Post Number: 14 Registered: 1-2007 |
Saving [re-Saving] as 24-bit Bitmap image usually solves "the following bitmap couldn't be loaded" error problem! Cheers |